Victor

Victor
Sort By:  
  • Burette Stand Metal Victor
    Burette Stand, Metal, Victor 15x10x45cm. (6x4x18”) Cat# M4661 (M4661)
    Burette Stand, Metal, Victor 15x10x45cm. (6x4x18”) Cat# M4661

    Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting
    nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality
    chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.
    Add to Cart
    RS:170.00
  • Clamps for Burettes Metal Fisher
    Clamps for Burettes Metal Fisher type Single Cat# M4711 (M4711)
    Clamps for Burettes Metal Fisher type Single Cat# M4711

    Cut from Mild Steel sheets, these clamps are powder coated. Fingers are sheathed in rubber to securely grip burettes, small columns, etc. With
    built-in boss-head. Sizes available are:
    Add to Cart
    RS:85.00
  • 3 Finger Clamps
    3 Finger Clamps Cat# M4721 (M4721)
    3 Finger Clamps Cat# M4721

    Powder coated clamp, with chrome plated rod. Jaws are Rubber sheathed. For tightening, Tommy bar can be provided or plastic knob. Made of
    Aluminium Alloy with MS screws. Total Length: 9”. For holding Condensors, Columns & other general glassware. Boss-head to be purchased

    Now also available:
    3 Finger Clamps in Brass, with Chrome Plating and Stainless Steel Rod. Total Length: 9”. Much stronger than Aluminium casting.
    Add to Cart
    RS:150.00
  • Burette Stand Metal Victor
    Burette Stand Metal Victor 22.5x15x60cm. (9x6x24”) Cat# M4664 (M4664)
    Burette Stand Metal Victor 22.5x15x60cm. (9x6x24”) Cat# M4664

    Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting
    nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality
    chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.
    Add to Cart
    RS:330.00
  • 4 Finger Clamps
    4 Finger Clamps Universal Clamp Cat# 4722 (4722)
    4 Finger Clamps Universal Clamp Cat# 4722

    Powder coated clamp, with chrome plated rod. Jaws are cork lined. For tightening, Tommy bar can be provided or plastic knob. Total Length: 9”.
    Made of Aluminium Alloy with MS screws. For holding Condensors & other glassware. Boss-head to be purchased separately.
    Add to Cart
    RS:165.00
  • Combined Clamps
    Combined Clamps Cat# 4725 (4725)
    Combined Clamps Cat# 4725

    Powder coated clamp. Jaws are cork lined. With built-in Boss-head. Made of Aluminium Alloy with MS screws. Without rod.
    Add to Cart
    RS:225.00
  • Universal Clamps
    Universal Clamps Cat# 4723 (4723)
    Universal Clamps  Cat# 4723

    Powder coated clamp, with chrome plated rod. Jaws are cork lined. For tightening, Tommy bar can be provided or plastic knob. Total Length: 9”.
    Made of Aluminium Alloy with MS screws. For holding Condensors, etc. Boss-head to be purchased separately.
    Add to Cart
    RS:155.00
  • Boss Head
    Boss Head Cat# 4731 (4731)
    Boss Head Cat# 4731


    Powder Coated, aluminium alloy construction. ‘V’ shape securely grips rods. Tightening clamps can be provided either as Tommy Bar or Plastic
    Knob. Can accomodate up to 16mm rods in both ‘V’ slots.

    Now also available:

    Boss-Head in Brass, with Chrome Plating. Much stronger than Aluminium casting.
    Add to Cart
    RS:65.00
  • Burette Stand Metal Victor
    Burette Stand Metal Victor 20x12.5x60cm. (8x5x24”) Cat# M4663 (M4663)
    Burette Stand Metal Victor 20x12.5x60cm. (8x5x24”) Cat# M4663

    Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting
    nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality
    chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.
    Add to Cart
    RS:240.00
  • Boss Head
    Boss Head Brass Casting Cat# 4736 (4736)
    Boss Head Brass Casting Cat# 4736

    Powder Coated, aluminium alloy construction. ‘V’ shape securely grips rods. Tightening clamps can be provided either as Tommy Bar or Plastic
    Knob. Can accomodate up to 16mm rods in both ‘V’ slots.

    Now also available:

    Boss-Head in Brass, with Chrome Plating. Much stronger than Aluminium casting.
    Add to Cart
    RS:230.00
  • Bunsen Burner
    Bunsen Burner With Stopcock Cat# BLS1242 (BLS1242)
    Bunsen Burner With Stopcock Cat# BLS1242

    Cast iron base with riffled gas inlet and stopcock to regulate the flow of gas.
    The burner tube is 12mm in diameter, brass chrome-plated burner tube
    having a screw type sleeve air regulator around the jet nozzle to adjust the air-gas mixture. The burner is supplied with 2 jets (for LP gas and Natural gas). The spare jet is fitted on the base.
    Add to Cart
    RS:225.00
  • Bunsen Burner Advanced
    Bunsen Burner Advanced 11-101-04 Cat# BLS1243 (BLS1243)
    Bunsen Burner Advanced 11-101-04 Cat# BLS1243

    Cast iron base with riffled gas inlet and 12mm diameter brass tube
    chrome-plated burner tube having a screw type sleeve air regulator
    around the jet nozzle to adjust the air-gas mixture. The burner is supplied with 2 jets (for LP gas and Natural gas). The spare jet is fitted on the base.
    Add to Cart
    RS:390.00
  • Clamps for Burettes Metal Fisher
    Clamps for Burettes Metal Fisher type Double Cat# M4712 (M4712)
    Clamps for Burettes Metal Fisher type Double Cat# M4712

    Cut from Mild Steel sheets, these clamps are powder coated. Fingers are sheathed in rubber to securely grip burettes, small columns, etc. With
    built-in boss-head. Sizes available are:
    Add to Cart
    RS:140.00
  • 3 Finger Clamps
    3 Finger Clamps Brass Casting Cat# M4726 (M4726)
    3 Finger Clamps Brass Casting Cat# M4726

    Powder coated clamp, with chrome plated rod. Jaws are Rubber sheathed. For tightening, Tommy bar can be provided or plastic knob. Made of
    Aluminium Alloy with MS screws. Total Length: 9”. For holding Condensors, Columns & other general glassware. Boss-head to be purchased

    Now also available:
    3 Finger Clamps in Brass, with Chrome Plating and Stainless Steel Rod. Total Length: 9”. Much stronger than Aluminium casting.

     
    Add to Cart
    RS:396.00
  • Burette Stand Metal Victor
    Burette Stand Metal Victor 17.5x12.5x60cm. (7x5x24”) Cat# M4662 (M4662)
    Burette Stand Metal Victor 17.5x12.5x60cm. (7x5x24”) Cat# M4662

    Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.
    Add to Cart
    RS:220.00
  • Square Boss Head
    Square Boss Head Cat# 4735 (4735)
    Square Boss Head Cat# 4735

    Powder coated clamp, with chrome plated rod. Jaws are cork lined. For tightening, Tommy bar can be provided or plastic knob. Total Length: 9”.
    Made of Aluminium Alloy with MS screws. For holding Condensors, etc. Boss-head to be purchased separately.
    Add to Cart
    RS:105.00
  • Burette Stand Metal Victor
    Burette Stand Metal Victor Base: 30x20cm. Rod: 90cm x 12mm. Cat# M4665 (M4665)
    Burette Stand Metal Victor Base: 30x20cm. Rod: 90cm x 12mm.  Cat# M4665

    Burette Stands are made from the best available materials. Bases are made from thick, heavily powder-coated Mild Steel, with non-rusting
    nylon feet. One foot is on a screw for covenient levelling of the base on uneven surfaces. Rods are made from Mild Steel, with high quality
    chrome-plating to provide a long rust-free life. Also provided with a handle for tightening into the base.
    Add to Cart
    RS:790.00
Per Page      1 - 17 of 17

Brands Scrolling List

  • SHIMADZU
  • VEEGO
  • EUTECH INSTRUMENTS
  • Hoefer
  • HAMILTON
  • THERMO SCIENTIFIC
  • PolyScience
  • LAB NET
  • SPECTRALAB
  • Sigma Aldrich
  • Biogene Life Sciences
  • Kimberly Clark
  • Whatman
  • Olympus
  • Axygen
  • TARSONS
  • BROOKFIELD
  • Raman&Well
  • MEDIQUIP
  • ADVANCE